Reverse Osmosis desalination (Design , knoledge management and planning).
Course Outlines :
- Water Quality: 4 hrs
- Feed source and Feed quality parameters
- Feed water chemical analysis interpretation
- Pretreatment: 5 hrs
- Pretreatment process
- Feed water treatment program
- Chemicals selection and dosing rates
- Permeate post treatment: 3 hrs
- Permeate destinations and required quality
- Different process of post treatment
- Hydraulic Design: 12 hrs
- Feed/Product Flow configuration (plug flow, recirculation, etc…)
- Average flux (Feed Pressure / Required flowrate)
- Balanced flow rate
- Pumps sizing and selection
- Energy recovery equipment sizing and selection
- RO Design: 7 hrs
- Membrane element selection
- Determine no. of elements / no. of pressure vessels needed (No. of stages – stage ratio – No. of passes, Taper design… etc.)
- Mechanical Design: 9 hrs
- Pipe material selection
- Assembly procedures and proper fitting
- Energy recovery for RO plants- Energy consumption
- Control Design: 8 hrs
- Instrumentation (gauges/meters/ etc…)
- Introduction to AC Motors
- Variable speed (frequency) drive (VFD) , function, installation and operation
- Electric Panel Assembly, equipment protection and switch Gears
- Operation: 6 hrs
- Startup
- Shutdown
- Ro data collection & monitoring
- Maintenance: 6 hrs
- Preservation methods for TFC membranes
- Membrane cleaning
- Troubleshooting: 4 hrs
Code | Total | Dates | Venue |